Saw which cuts metal

The clamp is strong and the head wobble is minimized by its sturdiness. Clean up time is seriously reduced and the metal is cool to the touch right after cutting. There are also much fewer sparks than with an abrasive blade. Chips fall through the grooves in the machine where the blade goes in and are collected in the back and can be removed.

On top of the machine is handle which makes carrying it a lot easier. Also the clamp thread has been updated to a square thread for increased efficiency. Finally, any adjustments to the saw can all be done with the same size allen key which is stored on the front of the saw. Overall this is an outstanding chop saw that accurately cuts through metal clean and fast with loads of great added features. The Makita LC is another cold-cut chop saw that cuts a lot cooler and cleaner with less burrs than an abrasive blade chop saw.

The base is solid cast aluminum which keeps it very sturdy and the vise is made from solid steel that firmly holds everything in place. The wheel is really nice to use as well because it spins fast and has quick release on the clamp to save time.

Another nice feature is the blade adjustment and how easy it is to adjust it. You can quickly switch it between 45 and 90 degrees in a few seconds and lock it in place. Other cool features are the chip collector tray, and the easy blade changes. Obviously, not having these features does make it cheaper than the SCPS, which makes it a great option for home buyers on more of a budget.

It does still have some great features such as the square thread clamp with quick release and easy blade change. All this at a price not too much more expensive than an abrasive blade chop saw makes it definitely one to consider. As one of the most expensive chop saws on the market, is it really worth it?

Well the carbide-tipped blade is sure to give you fast cuts that are cool to touch and relatively burr-free. The biggest drawbacks are that it could have been built a bit more solidly with some better features. The blade guard is plastic, whereas Makita and Evolution offer metal guards. To learn more or opt-out, read our Cookie Policy.

Read this guide to learn about the best metal cutting tools to have on hand, and the best methods to cut common items, such as sheet metal, studs, and pipes. The best metal cutting tool depends largely on the type of metal being cut, the quantity, and also on your experience level. A few cuts here and there require a much different tool from, say, the bulk cutting of corrugated sheet metal for a new roof.

Cutting metal is a dangerous job. Once the cutting tool touches the metal, hot, sharp fragments will get thrown into the air and could cut or burn you. Cover your arms with a long-sleeved shirt and wear pants made from fire-resistant material s. Don steel-toe work boots to protect your feet, and puncture-resistant gloves to protect your hands from getting cut by sharp edges or burned by hot metal.

The original metal-cutting tool, the manual hacksaw , is an easy, inexpensive option for cutting through metal and a slew of other materials. Ideal for small projects and home improvement needs, the hacksaw is typically one of the first tools a homeowner purchases, thanks to its low cost and versatility. Like a pair of scissors, tin snips are an inexpensive handheld tool that cuts straight, or if the blade is curved, can cut curves and circles.

Tin snips are ideal for cutting soft metals like aluminum and copper, and are especially useful for cutting sheet metal, gutters, metal roofing, and studs.

Thanks to their sharp blades, tin snips typically leave a smooth edge. An upgrade from the manual tin snips, this power tool comes in handy when your project calls for cutting bulk or long metal sheets.

Not only can it make a lot of clean cuts quickly, but it can also handle a thicker-gauge metal. In addition to cutting stone, tile, concrete, and mortar, this tool can cut a variety of metals, from aluminum to steel, by simply changing the cutting wheel to a metal cutoff wheel. Roofing, sheet metal, and corrugated metal—basically any metal that generally requires just a simple, straight cut—can be cut by a circular saw with the right blade.

And, depending on the blade you choose, you may be able to stack up a couple of pieces and cut them all at once, reducing your cutting time. Not only great for bulk cutting of tubes and flat stock, but band saws are also precise—optimal for cutting out custom shapes or tricky angles.

The type of metal, its gauge, and your blade choice will influence the cutting speed. This tool mixes oxygen with acetylene a hydrocarbon gas from tanks, and once you light the nozzle, a high-temperature flame will allow you to cut thick pieces of metal that are otherwise impossible via other methods.

The torch is also faster and much quieter than a saw, but does require some practice to use it properly. If they do, you may be cutting too fast, or your blade may have become too dull. To remove a burr, enlist the help of a deburring tool , metal file , or attach a flap disk to your angled grinder to smooth your metal pieces. Cookie banner We use cookies and other tracking technologies to improve your browsing experience on our site, show personalized content and targeted ads, analyze site traffic, and understand where our audiences come from.